Clothing glue
Scissors or an exacto-knife
A pencil
A ruler
Steps to follow:
1. Use the pencil to mark out the dimensions of your stocking. Remember that you will be losing some of the size when you glue the two sides together so trace your pattern a little bigger than you want the stocking to be. This is roughly the pattern I used, you can change the dimensions based on how big you want your stocking to be. The best bet is to use your ruler to make points and then trace them out with a pencil into your desired shape. Here's what mine looks like. I pretty much kept to the pattern. Once you have your shape drawn up, you can cut along your pattern with your scissors or exacto knife.
2. For the second half, you can simply trace out your first half. It doesn't have to be exact because when you place the glue down you can be more precise. Once you've drawn it, cut it out. Now you have your two sides!
3. Carefully (!!) take the glue along the the outside of one of your stocking halves, making sure not to put any glue on the top as that would close the top of your stocking.Then, place the other half down onto the glue. LET IT DRY BEFORE DOING ANYTHING ELSE. Clothing glue doesn't take too long to dry, but to be on the safe side, I would suggest leaving it for at least 10-15 minutes. When you think it's dry, give the each side a light testing pull. If the two halves don't budge, you're ready to turn your creation inside out. Do this gently. You can also use your fingers to push the different round parts into place. It'll look a little funny at first but you can flatten it down with your hand, felt is quite malleable.
4. The look of your cuff is very flexible. Whether you like a large cuff or a small one, all you have to do is glue one length all the way around the inside of your stocking. To do this, line your cuff with glue on one length but take your time pressing the gluey side into the inside of the stocking in order to ensure the cuff will be straight. Let that dry for 10-15 minutes and give the glued sections a light tug to make sure everything is set in place before you move on to the next step.
5. You want to glue the other end down onto the stocking. If you want a flat look, place the glue on the underside of the cuff and simply press it down onto the stocking. I went for a more dimensional look: place the glue in a line directly on the stocking and fold the very edge of the cuff so that a small part of the outside surface of the cuff is glued to the stocking. Do this in small sections to ensure you get a straight line around your stocking. Don't forget to let this dry for 10-15 minutes before doing anything else.
6. The hook is optional but I find that it makes the stocking more authentic and easier to hang. I just took some leftover felt from the stocking body section, cut a thin strip, and glued it to the inside corner of the stocking.
7. Finally, no stocking would be complete without a little decoration. I cut out letters from my third colour and glued them onto the cuff to personalize the stocking. I also used leftover felt to make a small holly corner border for a festive feel.
Try to let your entire stocking dry for a couple of hours before you hang it. Gravity will help it flatten to a more stocking shape and all your glue will have ample time to dry and set. Now your stocking is ready to be hung!
xo Dani
No comments:
Post a Comment